Description
Tension and torsion combined static bearing servo actuator produced by our company is a device that outputs tensile force and torsional force in electro-hydraulic servo system, and is a key component of dynamic loading. It is mainly used in the field of dynamic, static and fatigue testing. The Tension and torsion combined static bearing servo actuator is mainly composed of the servo linear cylinder, the servo swing cylinder, the displacement sensor, the Angle sensor and the connection mechanism of the linear cylinder and the swing cylinder, etc., which can realize a variety of closed-loop control.
Specification
Working pressure: 21Mpa
Maximum static tensile force: 300kN
Maximum tensile and compressive dynamic force: 240kN
Piston rod diameter: Φ125mm
total tension stroke: 160mm
effective tension stroke: 150mm
Maximum torsional static force: 1000Nm
Maximum torsional dynamic force: 800Nm
Total torsion Angle: 100°
effective torsion Angle: 90°
Linear servo actuator independent working frequency: 0.01Hz-100Hz
Oscillating servo actuator independent working frequency: 0.01Hz-50Hz
拉扭复合静压支撑伺服作动器是电液伺服系统中输出拉压力和扭转力的装置，是动态加载的关键部件。主要应用于动静态及疲劳测试领域。拉扭复合静压支撑伺服作动器主要由伺服直线缸、伺服摆动缸、位移传感器、角度传感器及直线缸和摆动缸的连接机构等组成，可实现多种闭环控制。
Specification
Working pressure: 21Mpa
Maximum static tensile force: 300kN
Maximum tensile and compressive dynamic force: 240kN
Piston rod diameter: Φ125mm
total tension stroke: 160mm
effective tension stroke: 150mm
Maximum torsional static force: 1000Nm
Maximum torsional dynamic force: 800Nm
Total torsion Angle: 100°
effective torsion Angle: 90°
Linear servo actuator independent working frequency: 0.01Hz-100Hz
Oscillating servo actuator independent working frequency: 0.01Hz-50Hz
Compound working frequency: 0.01Hz-10Hz
l 工作压力：21Mpa
l 最大拉压静态力：100kN
l 最大拉压动态力：80kN
l 拉压总行程：336mm
l 拉压有效行程：300mm
l 最大扭转静态力：3000Nm
l 最大扭转动态力：2400Nm
l 扭转总角度：100°
l 扭转有效角度：90°
l 直线伺服作动器单独工作频率：0.01Hz-100Hz
l 摆动伺服作动器单独工作频率：0.01Hz-50Hz
l 复合工作频率：0.01Hz-20Hz
